home *** CD-ROM | disk | FTP | other *** search
/ Chip 1997 March / CHIP Mart 1997.iso / SurfCam / SURFCAM.Z / DSN2IGS.CFG < prev    next >
Text File  |  1996-04-01  |  2KB  |  58 lines
  1. #begin default section
  2. begin default
  3.  
  4. Units               Inches     Units for the numbers below (Inches/MM)
  5.   
  6. Tolerance           0.00005    Default tolerance for trims & breaks
  7. ChainTol            0.001      Default tolerance for chain selection
  8. ViewTol             0.1        Default angular degrees to find "existing" views
  9. SurfIntTol          0.0004     Default Surface Intersection Tolerance
  10. ProjectTol          0.0004     Default Projection tolerance
  11. DiscontTol          0.0004     Default tolerance for spline continuity
  12. PolylineTol         0.001      Default tolerance for polyline continuity
  13.  
  14. ConvertToNURB       0          1 Convert parametric surfaces to NURBS
  15.                                0 Do not convert parametric surfaces to NURBS
  16.  
  17. SplineToNURB        0          1 Convert parametric splines to NURBS
  18.                                0 Do not convert parametric splines to NURBS
  19.  
  20. TrimOption          0          0 -- Output UV boundary as polyline
  21.                                1 -- Output UV boundary as degree 1 NURB curve
  22.  
  23. EntitySubscript     1          0 -- No subscripts are output
  24.                                1 -- Entities are numbered as they appear in file
  25. #end of default values
  26. end default
  27.  
  28. begin StartSection
  29. "IGES File generated by SURFCAM"
  30. end StartSection
  31.  
  32. begin GlobalSection
  33. ProductId         "SURFCAM v6.1"
  34. ReceiverId        "SURFCAM v6.1"
  35. AuthorName        "SURFCAM"    Author information is read from DSN file
  36. AuthorOrg         "No Author"  Author information is read from DSN file
  37. MinRes             0.0001
  38. MaxCoord           10000.0
  39. IGESUnits          Inch        Inch / MM
  40. IGESStd            9           1 -- IGES 1.0
  41.                                2 -- ANSI Y14.26M - 1981
  42.                                3 -- IGES 2.0
  43.                                4 -- IGES 3.0
  44.                                5 -- ASME/ANSI Y14.26M - 1987
  45.                                6 -- IGES 4.0
  46.                                5 -- ANSI Y14.26M - 1989
  47.                                8 -- IGES 5.0
  48.                                9 -- IGES 5.1
  49. DraftStd           0           0 -- No standard specified
  50.                                1 -- ISO
  51.                                2 -- AFNOR
  52.                                3 -- ANSI
  53.                                4 -- BSI
  54.                                5 -- CSA
  55.                                6 -- DIN
  56.                                7 -- JIS
  57. end GlobalSection
  58.